A Musty Basement Isn't Just an Odor Issue

A lot of people think that the musty scent of a basement is par for the course. Isn’t having a space that’s underground going to smell no matter what? The answer is actually no. Sure, basements are prone to higher humidity which means that it’s easier for mold and mildew to spore since moisture enables them to thrive. So that basement smell is actually mold, which, in addition to having a funky odor, can also cause decay and damage to a home over time. For people who suffer from asthma and other respiratory issues, the problem can be even more serious. 

The ideal humidity level for most homes is 50% or lower, but in basements, humidity can often skyrocket to 80%, which is the perfect environment for mold and mildew to flourish. If your basement seems extra damp, I highly suggest investing in a dehumidifier that will work to draw the moisture out of the air. You’ll be shocked at how quickly the holding tank on an average-sized unit fills. You may have to dump it daily, but in doing so you’ll be removing moisture that allows mold to grow in the first place.

Next, it’s time to purify the air. Overly humid areas attract a lot of bacteria, which is what causes the smell in the first place. That bacteria can live in walls and spread into your fabrics, furniture, and storage. By killing the bacteria in the air, you will remove contaminants that not only stink, but can also cause or irritate allergies, asthma, and immune system disorders.

One of the best air dehumidification and purification units I’ve seen is by a company called Aerus.  They produce a system that uses NASA technology to remove pathogens, pollution, contaminants, and even pet dander from the air. Regardless of what brand you go with, be sure to look for a unit that has the EnergyStar seal, and make sure that you pay attention to the capacity of the air filtration as it pertains to your room size. If you have a big space with a lot of moisture, you might want to consider a unit that has a self-draining system to save your back and your patience.

Regardless of your plan of attack, the air quality in your home should be taken seriously. If your kids are coughing or have allergies and you find yourself having difficulty breathing at home, it might be worth a call to your local contractor for an air quality inspection. The symptoms of a mold allergy are not dissimilar to a common cold, so a simple reading of your in-home humidity might be a smart first step.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

A House That Can Breathe is Crucial To Its Health and Yours

I’m not shy about educating my readers on the importance of proper insulation in a house. But even if you’re one of only 20 percent of homeowners I meet with the right amount of insulation, chances are you’re still missing a critical piece of the puzzle. The missing component is ventilation and not enough of it can be harming both your home and your personal health in more ways than you think. 

In the winter, we crank up the thermostat, sending more heat into our homes than any other time of year. We all know that heat rises, which means a lot of what we’re pumping into the house will quickly find its way through the ceiling and into the attic. Think about when you’re in a car and the windows fog up. What do you do? Usually, you’ll increase the airflow either by using the vents or just cracking a window. A house works much the same way, except that if you don’t have air flowing inside the attic, the heat and moisture just gets stuck there. If the attic is very warm, that moisture will develop into mold and mildew which can feed on your insulation and rot the wood. If the attic is cold enough, the moisture will freeze into little domes or even icicles until the temperature rises enough for the water to thaw and then be absorbed into all the places that it shouldn’t. Neither is a good scenario.

So what’s the best way to protect your home? Start by investing in a hygrometer that measures water vapor in the air. A comfortable humidity reading is 30%-60%, but 45%-55% is an ideal level to maintain. If you’re seeing higher than 60% humidity in any area of your home, it’s going to be susceptible to mold, mildew and bacteria growth.

Remember, attic ventilation allows your house to “breathe” so you want to balance your intake and exhaust to ensure that what is coming in is going out equally. The best ventilation system will include soffit vents that are installed underneath the overhang of the roof and take in the air and ridge vents that are installed at the top of the roof for the hot air to escape. For this method to work efficiently, all louvered vents must be sealed off and you have to ensure that your insulation isn’t blocking the airflow. Believe it or not, most roof manufacturers will void the warranty if a proper ventilation system is not installed. Luckily, new roofing technology enables contractors to add intake ventilation directly into the roof as opposed to using soffit vents, so if you’re in the market for a new roof, be sure to ask for that option. 

It’s important to note that homes have different characteristics and what works well for one may not work well for another. With the right balance of air, homeowners can optimize their roof and maintain the overall health of their home and their families. Remember, it’s always a good idea to get advice from a professional before taking on a big remodeling project. 

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Waterproof Your Chimney for a Leak-Free Winter

You may have never thought about exterior chimney maintenance unless you’ve had a problem, but because chimneys come up above the roofline, they are more susceptible to harsh weather than any other part of your home. That’s why spending a little time and money to waterproof and protect the area can save you thousands of dollars and plenty of potential headaches down the road. 

If you plan on waterproofing your chimney, the first thing you’ll have to do is measure the surface area. Take care to measure all sides and add the measurements together to find the total surface area. This will help you to determine how much material you will need. 

Now, it’s time to clean. Your chimney will most certainly have mold, dirt, rust, and stains on it, and you’ll want to remove them before starting the waterproofing process. I like Chimney RX Safer Brick and Masonry Cleaner which you can use instead of muriatic acid for the same cleaning power without the harsh fumes or risk of burns. Applying the solution is easy: just use one part cleaner with four parts water and apply to the area with a pump sprayer. You can then either scrub the surface or use a power washer to remove the debris. Let everything dry for at least 24 hours before moving on to the next step. 

Next, you can start to prepare the area for any potential repair work. You don't want to damage your roof and shingles when waterproofing your chimney, so use a canvas drop cloth to cover the area as plastic can get very slippery. Make sure to cover over any windows or skylights that are in reach as well. Once waterproofing overspray has been applied, it will be incredibly difficult to remove. 

If you have minor cracks in the chimney, now is the time to fill them. Chimney RX makes a Masonry Crack and Joint Sealant that works really well on small cracks up to one-eighth of an inch. It simply paints on and then dries a milky white color. However, if you have larger cracks or if you need any part of the chimney rebuilt or tuckpointed, I highly suggest calling a professional to manage the repair. 

Once minor work has been completed, you’re ready to apply the waterproofing agent. Again, ChimneyRX makes a great product for the job. No matter what you use, be careful. Most people don’t realize that there is a difference between water repellent and sealant. A sealant will form a hard surface, trapping water inside and making the area susceptible to leaks, whereas a repellent will still enable the porous bricks to breathe and move the way they are supposed to. 

Applying the sealant is as easy as the cleaning step - all you’ll need is a pump sprayer with a fan nozzle. The product that you use will give instructions for the amount that you’ll need, so just go by your surface area and the directions provided. I always suggest starting from the base and working your way up, applying heavy coats using a side to side spraying motion. Unlike painting, it’s a good idea to apply a “flood coat” first and then top it up with a second coat within just a few minutes to even it out. For areas that feel oversaturated, have a soft bristle brush handy. Also, be sure you’re working in good weather - while waterproofing products do dry quickly, you’ll want to give them a good six hours in the sun to fully set before a bout of bad weather. 

Finally, just like any job on a roof, please make sure you’re comfortable with heights and working from a ladder before you tackle this project. The last thing we want is a trip to the emergency room from a nasty fall. When in doubt, always hire a pro to tackle the job.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.