Mold on Vinyl Siding Shouldn’t Be Ignored

In our area of Connecticut, vinyl siding is a popular cladding option for many homeowners. Starting in the 1950s, this aluminum replacement became a favorite for its low maintenance and high durability. With a wide variety of colors and textures, it continues to be a fantastic option, offering personalized style without having to worry about sanding, painting, or major maintenance. 

While vinyl siding is beneficial in so many ways, one complaint is the potential for mold growth, often on the north side of a home. To be clear, mold can grow anywhere, but the north side is the most susceptible because it gets the least amount of sun exposure. Mold, mildew, and fungus thrive in dark, damp places, which is why the north side is generally the most vulnerable. Constant shade, high vegetation, or anything that stops a house from getting regular sunlight is an invitation for mold to grow in that area. 

In addition to lack of sunlight, excess moisture is another mold inhibitor. The cause could be as simple as trapped rainwater that’s unable to drain properly. Another possible issue could be a faulty drain pipe or a gutter that’s dripping on the siding, cause constant dampness. Either way, a moisture problem is something you’ll definitely want to deal with as the water will continue to feed the mold, which will then spread. 

Another reason for mold growth on siding is a build-up of dirt, which is actually a food source for all different types of fungus. Something as simple as a dryer vent can cause dirt and dander to stick to the siding. Tree sap is also common and can be tough to remove. Homes on high traffic roads tend to get dirty more easily as well. All of these causes quite literally make a meal for mold spores to feast on. 

So what can you do to keep mildew at bay and ensure your vinyl siding looks great for years to come? Assessing your sunlight and moisture exposure is key, but what if you don’t want to cut down a tree or you happen to live in an area where moisture is a problem? A professional will be able to inspect your siding and treat the mold using a cleaner and blocker that removes spores and keeps them from coming back. It’s important to use a specially designed cleaner that is strong enough to tackle mold but not too harsh that it will damage the house. You also want to be careful not to use any bleach containing materials so as not to harm the vegetation surrounding your home. 

Once your house is cleaned, be sure to maintain your vinyl siding by assessing your home for moisture, treating leaks promptly, and keeping your gutters clear and free of debris. An annual inspection will help to ensure that any problems are dealt with promptly so they don’t get out of control. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Keep Energy Bills Down In Winter With These Tips

Outdoor lights, Christmas trees, and colder temperatures mean that December is usually one of the most expensive months in terms of utility bills. But with the holiday season behind us, January is a great time to take a closer look at how much energy you’re using and address the issues in your home that are causing those high costs. 

One resource that not enough people take advantage of is an energy audit by Energize Connecticut. For a fee, a home energy consultant will come to your home and conduct a full assessment, covering your furnace and water heater, air ducts, windows, doors and more. Plus they can offer rebates for upgrades and repairs. To apply, visit the EnergizeCT website and choose your service provider.

If you’re not in the market for an assessment would still like to enjoy some serious home energy savings, here are the top five spots I always check for air leaks and heat loss. 

1. Windows. Believe it or not, hanging heavy fabric drapes can help you retain up to 25% of the heat in your home. This is especially true with large glass doors that aren’t being used in the winter months. Also, be sure to check for gaps. Wooden window frames get warped with age and can lead to serious air leakage. For cracks that are smaller than a quarter of an inch, a silicone caulk will work to plug up areas where heat is escaping. Also, if you feel air coming right through your single panes and the glass rattles with the wind, beef them up with some shrink film. This product can be found at any home supply store and can be cut to fit any size. 

2. Doors. We don’t often open the windows in the winter, but doors are a different story. They let lots of air escape, but they can’t be sealed completely because we need to use them. I always suggest inspecting your door sweep to ensure it’s not damaged and replacing it if the bristles have come loose. A door snake or seal can also come in handy, which can be purchased at any big box store or even made at home with an old pair of stockings and some rice, beans, newspaper or another filling.

3. Attic. Those of you with an attic hatch are likely losing a ton of warm air through its frame. We all know that hot air rises, so seal up that hatch with heavy duty plastic, or build yourself an insulated box to fit over the entryway if you still need access to storage. 

4. Water Heater. Insulate your water heater’s tank and pipes with fiberglass. For the tank, fit a fiberglass blanket using foil tape, but be sure not to cover any valve or pipe openings. For the pipes, you can use fiberglass wrap or foam insulation. By adding a layer of insulation to your water heater, you’ll keep the warmth from escaping into the air and you’ll protect the machine from condensation in the warmer months. 

5. Insulation. Most homes simply do not have enough insulation in the walls and attic, which is probably the number one contributor to sky-high energy bills. Insulation acts as a barrier against heat flow, helping to keep the warm air inside the house by slowing the flow and stopping the heat from getting outside. The United States Environmental Protection Agency says that with proper insulation, the average home in our area can save approximately 16 to 50 percent in total heating and cooling costs depending on the age and condition of the home. Plus it’s one of the highest rated home improvements in terms of real estate resale value. 

Happy New Year Everyone! Here’s to a warm, happy and healthy 2020!

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Which Option Works Best for Keeping Sidewalks and Driveways Hazard Free?

While a White Christmas seemed far off this week, it is inevitable that more of the white stuff will be on its way come January. As far as snow goes, shoveling, and plowing are pretty straightforward methods of removal. But one question that I get asked all the time is how to choose the right melting agent to make snow and ice disappear from sidewalks and driveways. 

Snow melting agents generally come in two forms - traditional rock salt, also known as sodium chloride, and calcium chloride, which is the same compound used in sports drinks. While they sound similar, the two are actually quite different and each has its advantages and drawbacks. Sodium chloride, or rock salt, is a dry material that’s mined and applied to pavement using a walk-behind spreader or a commercial spreader mounted on a truck. Sodium chloride is activated by moisture and will begin to melt the snow when it gets wet. The problem with sodium chloride is that because it’s activated by water, it doesn’t work well if the temperature is below 15 degrees.  However, if temperatures are above 15 degrees, sodium chloride can be a good, inexpensive choice that will take longer to melt but will keep your walkways dry. If you have vegetation or animals, take note that sodium chloride will be harmful to plants and can hurt animals if ingested.

When temperatures dip below 15 degrees, calcium chloride is going to be your best bet. This liquid agent is sprayed onto the pavement and works instantly to melt snow and ice. In fact, calcium chloride can melt snow up to eight times faster than traditional rock salt alone. Of course, there are a few downsides to consider. Calcium chloride gets hot fast, so while its effective short term, it might not be able to do the full job in a huge storm. It’s also more expensive than traditional rock salt and stays wet, which can lead to slippery surfaces. On the plus side, it’s non-corrosive and won’t harm vegetation, although you’ll still want to keep your pets away from it. If in doubt, look for a calcium chloride pre-mixed with salt or abrasives to melt snow quickly while reducing the risk of creating a slippery surface.

Happy New Year Everyone! I hope you have a fantastic start to 2020.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.