Keeping Cool as the Temperature Rises

Mother Nature has decided to turn that heat dial up this weekend, leaving many people with nothing to do but crank up the air conditioning. Sure, a little A/C is a great way to provide fast relief, but keeping it blowing all summer long can do a number on your energy bill and your home. So this week I thought I’d put together a few simple tips to help you keep cool, but first, here is a story that might make you rethink your current set up.

A few years ago, I was called to a house in Bristol for a leak repair. When I got to the home, I found that the entire ceiling had fallen onto the dining room table. We hadn’t had rain for weeks, so I was confused how the leak occurred. It turns out that the home had no insulation or ventilation, and to combat the stifling heat seeping into the house from the attic, the homeowner had two window air conditioning units set on full blast all day. The cold air from the units and the hot air from the attic created so much moisture and mold that it completely deteriorated the plaster, causing the ceiling to fall in.

Having little or no insulation and ventilation in the attic will heat up your home like you wouldn’t believe. Most people think insulation and ventilation are only important in the winter, but they work as regulators, controlling air in both the warmer and colder months. Did you know that an attic can easily get up to 150 degrees on a hot summer day? Stand on a chair and put your hand as close to the ceiling as possible. Feel that heat? It’s a telltale sign that your house doesn’t have proper air flow, which, in addition to making you uncomfortable this summer, can also become a breeding ground for mold.

So what should you do? Start by investing in a hygrometer which measures water vapor in the air. A comfortable humidity reading is 30-60%, but 45-55% is an ideal level to maintain. If you’re seeing higher than 60% humidity in any area of your home, you’re going to be susceptible to mildew and bacteria growth.

Remember, attic ventilation allows your home to “breathe” so you want to balance your intake and exhaust to ensure that what is coming in is going out equally. The best ventilation system will include soffit vents which are installed underneath the overhang of the roof to take in the air and ridge vents which are installed at the top of the roof for the hot air to escape. For this method to work efficiently, all louvered vents must be sealed off and you have to ensure that your insulation isn’t blocking the airflow. Believe it or not, most roof manufacturers will void the warranty if a proper ventilation system is not installed. Luckily, new roofing technology enables contractors to add intake ventilation directly into the roof as opposed to using soffit vents so if you’re in the market for a new roof, be sure to ask for that option.

It’s important to note that homes have different characteristics and what works well for one may not work well for another. With the right balance of air, homeowners can optimize their home’s health but it’s always a good idea to get advice from a professional before taking on a big remodeling project. Stay cool friends, and have a Happy 4th of July!

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Let Your House Breathe and Say Goodbye to Dangerous Moisture

You hear me talk a lot about the importance of insulation in the home, especially at this time of year and with our recent, frigid temperatures. But even if you’re the one in every four houses I visit that actually does have the right amount of insulation, chances are that your ventilation is inadequate, which can be harming both your home and your personal health in more ways than you think.

In the winter, we crank up the thermostat, sending more heat and moisture into the living quarters of our homes. We all know that heat rises to the top, which means a lot of what we’re pumping into the house will quickly find its way through the ceiling and into the attic. Now, think about when you’re in a car and the windows fog up. What do you do? Usually, you’ll increase the airflow either by using the vents or just cracking a window. A house works much the same way, except that if you don’t have airflow in the attic, the heat and moisture just gets stuck there. If the attic is very warm, that moisture will develop into mold and mildew which can fester in your insulation and rot the wood. If the attic is cold enough, the moisture will freeze into little domes or even icicles until the temperatures rise enough for the water to thaw and then be absorbed into all the places it shouldn’t be going. Neither is a good scenario.

So what’s the best way to protect your home? Start by investing in a hygrometer which measures water vapor in the air. A comfortable humidity reading is 30-60%, but 45-55% is an ideal level to maintain. If you’re seeing higher than 60% humidity in any area of your home, you’re going to be susceptible to mold, mildew and bacteria growth.

Remember, attic ventilation allows your home to “breathe” so you want to balance your intake and exhaust to ensure that what is coming in is going out equally. The best ventilation system will include soffit vents which are installed underneath the overhang of the roof to take in the air and ridge vents which are installed at the top of the roof for the hot air to escape. For this method to work efficiently, all louvered vents must be sealed off and you have to ensure that your insulation isn’t blocking the airflow. Believe it or not, most roof manufacturers will void the warranty if a proper ventilation system is not installed. Luckily, new roofing technology enables contractors to add intake ventilation directly into the roof as opposed to using soffit vents so if you’re in the market for a new roof, be sure to ask for that option.

It’s important to note that homes have different characteristics and what works well for one may not work well for another. With the right balance of air, homeowners can optimize their roof and maintain the overall health of their home and their families, but it’s always a good idea to get advice from a professional before taking on a big remodeling project. Stay warm friends.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Don’t Hesitate, Insulate and Ventilate

I have to admit that I’m a big fan of the winter. I love skiing, playing ice hockey and hiking in the snow, but what I don’t love is coming home to a cold house. It’s around this time of year when I start to get calls from people all over town wondering why their home is so drafty and freezing when they’re paying a fortune in heating bills. The answer to their question is almost always a lack of insulation. Unfortunately, over 75% of houses in our area are under-insulated which means that heat is quite literally going through the roof.

Insulation is a cotton-looking fiberglass material bundled in pink or yellow colored rolls that you may have seen in your attic or behind the wall of new construction. It also comes in what we call “loose fill” which can be blown into harder to reach areas. Contractors use insulation between walls, in attics and in basements to retain heat in the house in the winter and keep the heat from getting into the house in the summer. The amount of insulation needed for a home is measured by its R-Value, which equates to its resistance to heat moving through it. Simply put, the higher the R-Value, the better the insulating properties.

Back 50 years ago when many of the homes in Central Connecticut areas were built, R-Value wasn’t a popular unit of measurement. Instead, they kept it simple and measured insulation by its thickness in inches. When a home was constructed, the contractor would put about three inches of insulation into the attic, if any was used at all. Three inches of insulation would give that homeowner an R-Value of about R-10. According to EnergyStar, homes in our area should be fitted with insulation that measures between R-49 and R-60. So if you have a home from the 50’s or 60’s and have never done an upgrade to your insulation, your home is definitely not equipped to handle our harsh Connecticut winters.

If you’re one of those homeowners scratching your head, trying to figure out why the house is so cold, take a trip up into the attic. Chances are your insulation isn’t up to scratch and it’s probably time for an upgrade. As a general guideline, insulation with an R-Value of between R-49 and R-60 will sit at between 19 and 22 inches thick when settled. How does your insulation stack up to that? If it doesn’t, you don’t have to worry - insulation is easy and inexpensive to install and has one of the highest resale values of any home improvement job going.

With any proper insulation job also comes ventilation, which allows air to move through the attic, preventing over and under heating and reducing the risk of mold buildup. We will talk about that in detail next week.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.