Contact Us

Please feel free to get in touch to ask a question, schedule an appointment or give us your feedback. We look forward to hearing from you. 

17 Divinity St
Bristol, CT, 06010
United States

8605895155

Since 1975, O'Donnell Bros has been providing greater Bristol and Central Connecticut with residential and commercial remodeling solutions. We specialize in roofing, siding, windows, doors, gutters, downspouts and so much more. We look forward to helping you with all your remodeling needs. 

HomeImprovement-PT-050114_9032 (1).jpg

Articles

O'Donnell Bros President, Bob O'Donnell, is a regular contributor to The Bristol Press. Read his home improvement articles here.

 

What's That Smell in Your Basement?

Chelsea O'Donnell

Most people think that a musty-smelling basement is normal. After all, isn’t that what you would expect from a part of the house that’s underground? The truth is that, while common, that damp odor that’s become expected is actually a sign of something more sinister than smell. 

First, let’s address what it is we’re smelling. Since basements are damper than any other part of the house, they are susceptible to higher humidity. Where there is high humidity, there is also a high chance for mold and mildew to spore. Why is this a problem? In addition to being bad for your home’s health, it’s terrible for yours too. Mold and mildew can bring on asthma and allergies and can make anyone with a respiratory problem feel a lot worse. 

The ideal humidity level for most homes is 50% or lower, but in basements, humidity can often skyrocket to 80%, which is the perfect environment for mold to flourish. If your basement seems extra damp, I highly suggest investing in a dehumidifier that will work to draw the moisture out of the air. You’ll be shocked at how quickly the holding tank on an average-sized unit fills. You may have to dump it daily, but in doing so you’ll be removing moisture that allows mold to grow in the first place.

Once you have rid your basement of extra moisture, it’s time to purify the air. Overly humid areas attract a lot of bacteria, which is what causes the smell in the first place. That bacteria can live in walls and spread into your fabrics, furniture, and storage. By killing the bacteria in the air, you will remove contaminants that not only stink, but can also cause or irritate allergies, asthma, and immune system disorders.

One of the best air dehumidification and purification units I’ve seen is by Aerus.  They produce a system that uses NASA technology to remove pathogens, pollution, contaminants, and even pet dander from the air. Regardless of what brand you go with, be sure to look for a unit that has the EnergyStar seal, and make sure that you pay attention to the capacity of the air filtration as it pertains to your room size. If you have a big space with a lot of moisture, you might want to consider a unit that has a self-draining system to save your back and your patience.

Regardless of your plan of attack, the air quality in your home should be taken seriously. If your kids are coughing or have allergies and you seem to have difficulty breathing at home, it might be worth a call to your local pro for an air quality inspection. The symptoms of a mold allergy are not dissimilar to a common cold or even COVID, so a simple reading of your in-home humidity might be a smart step once other things are ruled out.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Beware of Outdoor Remodeling During Winter Months

Chelsea O'Donnell

You might not believe it, but this time of year I get a lot of calls from homeowners who want to put on a new roof or update their vinyl siding. People often think winter is a good opportunity to do outdoor work since it’s past the holiday period and before spring sets in. As much as I hate to disappoint, now is actually a pretty dangerous time of year to do any exterior projects and here’s why:

  • When the weather is below 40 degrees, building materials start to change. As it gets colder, products such as shingles can get brittle and crack or split more easily. Materials such as vinyl siding shrink, which can lead to misalignment or potential for leaks when they later expand as the weather warms.

  • Another big issue is shingle adherence. Shingle sealant is activated by sun and heat. If there is not enough of either, the hold won’t be as strong as it should be, which could cause problems down the road. If the weather is too cold, we are often forced to hand seal, which can add time and cost to a generally simple process.

  • Most contractors use an air nail gun for external remodeling, which works by pressure. If humidity turns to ice in the airline, it can under or overdrive the nails instead of putting them in flush. Compressors face the same potential problem. 

  • Being on a roof or ladder in winter is dangerous. Even the most seasoned professionals need to take care as black ice can cause serious injury. While we take every precaution, there is a lot that can go wrong during cold conditions. It’s often not worth the risk. 

  • Winter weather is unpredictable. When it rains in the warmer months, we tarp a job thoroughly to ensure there aren’t any leaks. Snow is more difficult as it adds both moisture and weight to a job. Imagine having a roof open in February and a foot of snow falls from the sky.

  • A cold weather installation could void your warranty. Many products specify a proper installation environment, which is usually above 40 degrees. 

  • Winter jobs almost always take longer as roofers need to take extra precautions and more frequent breaks while working in cold conditions. The last thing you want is someone on a roof who can’t feel their toes. There is also less daylight, which will add time to an installation.

Sometimes, a winter repair or replacement is inevitable, and leaving the job until spring might make things worse. If this is the case for you, be sure that you’re working with an experienced contractor who has a solid track record in winter conditions and discuss all the precautions and extra steps that will be taken to ensure the job is done properly. The last thing you want is someone getting injured or a situation where corners have to be cut to accommodate less than fair conditions. In the end, is it really worth it? 

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

What’s Growing In Your Attic

Chelsea O'Donnell

This past week’s brutal temperatures had plenty of people thinking about the heat in their homes. While high energy bills, drafty windows, and cold floors are the obvious issues, what most homeowners don’t see is what’s causing the biggest problems in their homes. 

Most of the houses in our area are underinsulated and not properly ventilated. We all know from high school science class that heat rises, right? In a house, that means a good amount of heat makes its way up to the attic where it’s usually pretty cold. When warm and cold air collide, it creates moisture or condensation, which is the last thing you want up there. As an attic collects moisture, it adheres itself to any surface, which in an attic’s case is usually wood. That moisture becomes an ideal home for mold spores, which eat away at the plywood, causing it to rot. 

An attic that has enough insulation and ventilation allows air to flow through and temperature to regulate, which creates a healthy atmosphere and keeps a home warmer in the winter and cooler in the summer. A home without proper insulation and ventilation is susceptible to mold infiltration which will create rot, roof leaks, and can even become a potential health hazard in your home, especially for folks with asthma or allergies. 

So how do you know if your home has enough insulation and ventilation? A roofing contractor will be able to help you identify exactly what you need, but a good place to start is insulation. Insulation is measured by its R-Value, which is the level at which heat can penetrate it. According to EnergizeCT, the recommended R-Value for a home here in Connecticut is R38 to R60, which is roughly 12 inches thick at the low end of that range. If you can access your attic, you’ll be able to get an idea of your insulation situation. More than 75% of homes I visit don’t come close to an R-Value of 38, in fact, homes built before 1940 didn’t require insulation at all. Those built in the decades after usually have enough to be suitable for winter in Florida. 

A warm, energy-efficient, and healthy home always starts at the roof. Ensuring your home has enough insulation and ventilation is the best way to prevent bigger problems such as leaks from happening in the future. Plus, getting your home insulated and ventilated properly offers both tax credits and will immediately make a big difference in those energy bills. Don’t forget your family’s health as well. Illness from long-term exposure to mold is not something anyone wants to deal with.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.