Choosing the Best Driveway Material for Your Home

A cold winter and damage from plow trucks and salting might have your driveway looking a little worse for wear. I’ve had curbs taken off more times than I can count, and cracks almost always appear as a result of rough weather and surface materials that haven’t been updated in some time.

While it’s true that a driveway is a convenient place to park your car, it also offers considerable curb appeal and can increase the resale value of a home if a potential sale is in your near future. Of course, when considering driveway material, there are many to consider and what works for one house might not work so well for another. So let’s go through the pros and cons of the four most popular options to help you make the best decision for your home.

Asphalt

This is the most popular driveway material and for good reason - it’s practical and easy to install. An average asphalt driveway and typically be laid in a day and if properly maintained, they can last for up to 30 years or more. An asphalt driveway is also a safe bet with our cold winters and hot summers as they can stand up to severe temperature changes.

Sounds pretty good right? I think so, but there are a few drawbacks to be aware of. For starters, asphalt only comes in one color - black. So if you’re looking for something special to match the aesthetic of your home, you aren’t going to find it here. Another thing to consider is that asphalt does crack and crumble with age, but problem areas can be resealed so you don’t need to replace the whole driveway with every blemish.

Gravel

For people looking for a driveway solution on a budget, gravel might be the way to go. While they aren’t as popular as they once were, gravel is great for very long or intricately shaped paths. On the flip side, using loose stone can get very sloppy and you’ll likely find yourself regularly going out to get new materials to replace what’s been lost from both the weather and everyday use. Gravel is also tough to plow and shovel, so take that into consideration if your driveway gets a lot of snow.

Pavers

No one can deny the beauty of a brick or stone driveway. Homeowners love them for an upscale look that can mimic the style of the property while still offering a strong and reliable material that will last for decades. Of course, with beautiful pavers also comes high product and labor costs as each piece will have to be laid by hand. Take this into consideration when you’re thinking about which material to use as the installation of this material will likely mean your driveway will be out of commission for a lot longer than some of the other options.

Concrete

If you’d like a driveway with some individuality but don’t want to fork over the cash for pavers, concrete might be your best bet. Concrete is poured quite easily so the installation is relatively fast, although you’ll need to wait a week to drive on it. There are also many options to stamp or dye the material to create a unique look, including mimicking the design of pavers. While concrete is still more expensive than asphalt, it also lasts a really long time - 30 years or more. The downside? Concrete can be susceptible to cracking and can be pricier to fix.

No matter what type of driveway material you decide on, the end result will only be as good as what’s underneath the material. A qualified professional will discuss elevation, drainage, and environmental factors with you to help you make the best choice for your home.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

A Water Heater Tune-Up is Essential In Late Winter

This past week’s warm-up had us all thinking about beautiful spring days, but it’s around this time that a sudden cold snap can hit, throwing us back into the throngs of winter. After a long season of use, your hot water heater might be feeling some pain, so now is a great time to make sure it’s in excellent working order - both for next year and in the event that you’ll be needing it in tip-top condition for another month. Here are some tips.

• As a water heater operates, it collects sediment that can cause decay if left in the tank over time. Don’t let this happen to yours. Drain your water heater at least twice a year to get rid of any buildup, which will prevent corrosion and increase the machine’s energy efficiency.  

• First turn off the unit and give it plenty of time to cool down. Then, using a garden hose and pump, drain the water into a bucket. If the bucket becomes filled with brown, sediment-tainted water, continue to refill and drain your heater until the water looks normal again. When you’re in the clear, you can disconnect your hose and turn the unit back on.

• Keep your water heater at a steady 120 degrees and lower it down if you’re planning on leaving the house for three days or more. For every 10 degrees, you decrease the temperature, you’ll save five percent in energy costs.

• Insulate the tank and pipes with fiberglass. For the tank, fit a fiberglass blanket using foil tape, but be sure not to cover any valve or pipe openings. For the pipes, you can use fiberglass wrap or foam insulation. By adding a layer of insulation to your water heater, you’ll keep the warmth from escaping into the air and you’ll protect the machine from condensation in the warmer months.

• If you have a valve that’s leaking, make sure that the fittings are nice and tight. If that doesn’t work, you might have to replace the valves or fittings. You can find the parts you’ll need at a local hardware store – just don’t forget to shut off the water first!

Remember, working with electric or gas appliances can be dangerous. If you’re not familiar with how your unit operates or if you’re not comfortable with this kind of work, contact a plumber for a routine maintenance check.  

The average lifecycle of a water heater is about eight to twelve years and they can cost anywhere from $300 for an electric tank system to well over $1,000 for a tankless energy efficient natural gas machine. If you’re in the market for a new machine, do your research and make sure you maintain it regularly to ensure it will go the distance.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Rain and Moisture Make Basement Leaks a Common Problem

I have been talking about the importance of proper ventilation in the attic to prevent leaks lately and for good reason. But as the spring starts to edge closer, the basement takes the stage as the place in the house where leaks will most likely occur.

As the temperature warms, the snow melts and the rain becomes more frequent, the ground gets saturated with water. This water can find its way into your basement through non-structural cracks in poured concrete walls or deteriorated joints in masonry walls. Poorly fitted or old basement windows can also let water in, as well as utility openings.

The best line of defense against a wet basement is to make sure that the water is directed away from the foundation. Inspect your gutters and downspouts to see if they are working the way they should be and also check to see that the ground right around the house is higher than the rest of the yard. Having the yard grade at its highest around the perimeter of the foundation will ensure water drains away from the house instead of into it.  

If you think your house is susceptible to leaks, you can also use a waterproofing membrane or coating to seal the foundation or basement area. However, if you have regular leaking problems, you may need to have a drainage or sump pump system installed by a professional.

Even if you don’t have a leak problem, the basement can get pretty damp from now through April which creates the perfect environment for nasty mold and mildew. To get rid of the excess water, I always like to run a dehumidifier in the basement as the weather warms up.

A dehumidifier works by pulling the moisture out of the air and storing the excess water in a holding tank. Many people keep dehumidifiers in their basement all year long to control the dampness that can often be felt in underground areas, but I find it especially useful this time of year.

You can find out if your basement is holding a lot of moisture by purchasing a simple five-dollar humidity gauge from the local hardware store. Ideally, you want the humidity to be under 50%. If it’s higher, a dehumidifier might be a good solution. Generally, a unit will come in 25, 30 and 40-pint models, and on average a 25-pint unit will be sufficient to control the moisture in a 1,000 square foot area.

One last word of advice - if you have a dehumidifier or plan on getting one, please be sure to empty it regularly and keep the filter clean. A simple wipe down with a damp cloth and spray bottle will do the trick to keep you breathing freely and ensure a longer life for the appliance.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.