10 Easy Tips To Keep Windows Clean and Streak-Free

Window washing is such a dreaded task that most homeowners don’t bother doing it. But there is nothing like clean glass to help bring the outdoors in and make your house feel really clean. If it has been awhile since you gave your windows some love, here are ten of my favorite tricks, tips, and hacks to simplify the job and get your glass gleaming again.

1. Never clean windows on a hot day. The glass will heat up, causing your washing solution to dry on the panes faster than you’ll be able to wipe it off. A cloudy, overcast day is your best bet for this job. 

2. Instead of relying on reams of paper towels, stop into your local hardware store and grab an eight-inch squeegee for those small panes. They make the job a lot easier with much less waste.

3. Don’t forget to wipe your squeegee blade between swipes to remove access cleaning solution and dirt. Otherwise you’ll just be spreading it around.

4. Here is a great DIY window cleaning solution. Combine one cup of hot water and one cup of white distilled vinegar. Mix in a spray bottle and there you have it. For very grimy windows, clean with hot soap and water first, followed by the vinegar mixture for a nice shine. 

5. To get rid of really pesky streaks, use a dry board eraser. Unlike paper towels, an eraser can do away with streaks without leaving lint behind. 

6. If you really hate washing windows, take an extra step, and apply a window protectant. The clear polymer coating will help protect the glass from dust, dirt, and grime for longer. 

7. Hard water spots can be tough to remove with a regular window cleaner. A dryer sheet will do the trick, just buff in circular motions. It works on mirrors and shower doors too. 

8. Caterpillars love building nests in window tracks. Clean them out with a thin screwdriver and then follow up with a firm, toothbrush-sized bristle brush. 

9. Hate cleaning blinds? Wrap a pair of kitchen tongs in two microfiber cloths and secure with an elastic band on either side. Run the tongs between each slat to remove dust and pet dander. 

10. Have a can of WD-40 in the garage? A quick coat on freshly cleaned window sills will prevent dirt and grime from sticking.

If you swear that this round of window washing will be your last, consider upgrading to vinyl windows. The seamless, tilt-in design makes them so easy to clean and they are energy efficient too . It’s one of the best upgrades you can make to your home to save both time and money in the long run. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

Add Curb Appeal with These Driveway Upgrades

A driveway is a convenient place to park your car, but it can also offer considerable curb appeal and increase the sale price of a home that’s going on the market. 

When choosing driveway material, there are many to consider and what works for one house might not work so well for another. So let’s go through the pros and cons of the four most popular options to help you make the best decision for your home.

Asphalt

This is the most popular driveway material and for good reason - it’s practical and easy to install. An average asphalt driveway can typically be laid in a day and if properly maintained, it can last for up to 30 years or more. An asphalt driveway is also a safe bet with our cold winters and hot summers as they can stand up to severe temperature changes. Sounds pretty good right? I think so, but there are a few drawbacks to be aware of. For starters, asphalt only comes in one color - black. So if you’re looking for something special to match the aesthetic of your home, you aren’t going to find it here. Another thing to consider is that asphalt does crack and crumble with age, but problem areas can be resealed so you don’t need to replace the whole driveway with every blemish.

Gravel

For people looking for a driveway solution on a budget, gravel might be the way to go. While they aren’t as popular as they once were, gravel is great for very long or intricately shaped paths. On the flip side, using loose stones can get very sloppy and you’ll likely find yourself regularly going out to get new materials to replace what’s been lost from both the weather and everyday use. Gravel is also tough to plow and shovel, so take that into consideration if your driveway gets a lot of snow.

Pavers

No one can deny the beauty of a brick or stone driveway. Homeowners love them for an upscale look that can mimic the style of the property while still offering a strong and reliable material that will last for decades. Of course, with beautiful pavers also comes high product and labor costs as each piece will have to be laid by hand. Take this into consideration when you’re thinking about which material to use as paver installation will likely have your driveway out of commission for a lot longer than some of the other options.

Concrete

If you’d like a driveway with some individuality but don’t want to fork over the cash for pavers, concrete might be your best bet. Concrete is poured quite easily so the installation is relatively fast, although you’ll need to wait a week to drive on it. There are also many options to stamp or dye the material to create a unique look, including mimicking the design of pavers. While concrete is still more expensive than asphalt, it also lasts a really long time - 30 years or more. The downside? Concrete can be susceptible to cracking and can be pricier to fix.

No matter what type of driveway material you decide on, the end result will only be as good as what’s underneath the material. A qualified professional will discuss elevation, drainage, and environmental factors to help you make the best choice for your home.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Keep Your Home Mold Free This Summer

Hot weather is on the horizon and it won’t be long before we begin complaining about the humidity. I don’t mind the heat, but like most, the sticky moisture that comes along with it can be a real bummer in the summer.

A lot of homeowners combat humidity by using air conditioners in their houses, and while they can reduce the moisture in the air to some degree, this is by no means their primary function. An air conditioner works by sucking the air from your home, cooling it, and blowing it back into the house. That process does reduce the humidity slightly, but pairing your air conditioner with a dehumidifier is the best way to cool down your home so you can sleep more comfortably at night.

A dehumidifier works by pulling the moisture out of the air and storing the excess water in a holding tank. Many people keep dehumidifiers in their basement all year long to control the dampness that can often be felt in these underground areas. This is a great idea because controlling the humidity in the dampest part of your home will very likely help to regulate the rest of the house.  

One way to know if your house is holding a lot of moisture is to purchase a simple five-dollar humidity gauge from the local hardware store. Ideally, you want the humidity to be under 50%. If it’s higher, you might want to consider using a dehumidifier in the main part of your home, especially on hot summer days and in areas where you spend the most time. 

In addition to cooling the air and decreasing moisture, running a dehumidifier during the hottest parts of the hottest days can also prevent mold and mildew growth, eliminate musty odors in the home, and prevent old pipes from sweating. Plus, you can use the water collected in the tank to give your outdoor plants a good drink. 

Dehumidifiers generally run on about half the energy of an air conditioning unit, so as long as you don’t run them all day, using one shouldn’t affect your energy bill. Just be sure to keep windows and doors closed when you run your unit, and only switch the power on during the most humid time of the day, or when the air is above 50 percent humidity.

Be aware that dehumidifiers by nature are drying, so try not to run them while you’re occupying the room over a long period of time, like when you’re sleeping at night. Also, be careful about using dehumidifiers in conjunction with an attic fan. I see people do this all the time and they unintentionally throw the excess moisture from their home or basement up into their attic, where it has no place to escape.

If you’re thinking that a dehumidifier might be a good solution for you, they come in different sizes and can be used for residential or commercial purposes. Generally, a unit will come in 25, 30, and 40-pint models, and on average a 25-pint unit will be sufficient to operate in a 1,000 square foot area.

Finally, if you have a dehumidifier, please be sure to keep the filter clean. Dust, dirt, and debris can get caught in the filter, preventing air from flowing freely and potentially circulating mold spores throughout the home. A simple wipe down with a damp cloth and spray bottle will do the trick to keep you breathing freely and ensure a longer life for your appliance.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.