Add Curb Appeal with These Driveway Upgrades

A driveway is a convenient place to park your car, but it can also offer considerable curb appeal and increase the sale price of a home that’s going on the market. 

When choosing driveway material, there are many to consider and what works for one house might not work so well for another. So let’s go through the pros and cons of the four most popular options to help you make the best decision for your home.

Asphalt

This is the most popular driveway material and for good reason - it’s practical and easy to install. An average asphalt driveway can typically be laid in a day and if properly maintained, it can last for up to 30 years or more. An asphalt driveway is also a safe bet with our cold winters and hot summers as they can stand up to severe temperature changes. Sounds pretty good right? I think so, but there are a few drawbacks to be aware of. For starters, asphalt only comes in one color - black. So if you’re looking for something special to match the aesthetic of your home, you aren’t going to find it here. Another thing to consider is that asphalt does crack and crumble with age, but problem areas can be resealed so you don’t need to replace the whole driveway with every blemish.

Gravel

For people looking for a driveway solution on a budget, gravel might be the way to go. While they aren’t as popular as they once were, gravel is great for very long or intricately shaped paths. On the flip side, using loose stones can get very sloppy and you’ll likely find yourself regularly going out to get new materials to replace what’s been lost from both the weather and everyday use. Gravel is also tough to plow and shovel, so take that into consideration if your driveway gets a lot of snow.

Pavers

No one can deny the beauty of a brick or stone driveway. Homeowners love them for an upscale look that can mimic the style of the property while still offering a strong and reliable material that will last for decades. Of course, with beautiful pavers also comes high product and labor costs as each piece will have to be laid by hand. Take this into consideration when you’re thinking about which material to use as paver installation will likely have your driveway out of commission for a lot longer than some of the other options.

Concrete

If you’d like a driveway with some individuality but don’t want to fork over the cash for pavers, concrete might be your best bet. Concrete is poured quite easily so the installation is relatively fast, although you’ll need to wait a week to drive on it. There are also many options to stamp or dye the material to create a unique look, including mimicking the design of pavers. While concrete is still more expensive than asphalt, it also lasts a really long time - 30 years or more. The downside? Concrete can be susceptible to cracking and can be pricier to fix.

No matter what type of driveway material you decide on, the end result will only be as good as what’s underneath the material. A qualified professional will discuss elevation, drainage, and environmental factors to help you make the best choice for your home.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Keep Your Home Mold Free This Summer

Hot weather is on the horizon and it won’t be long before we begin complaining about the humidity. I don’t mind the heat, but like most, the sticky moisture that comes along with it can be a real bummer in the summer.

A lot of homeowners combat humidity by using air conditioners in their houses, and while they can reduce the moisture in the air to some degree, this is by no means their primary function. An air conditioner works by sucking the air from your home, cooling it, and blowing it back into the house. That process does reduce the humidity slightly, but pairing your air conditioner with a dehumidifier is the best way to cool down your home so you can sleep more comfortably at night.

A dehumidifier works by pulling the moisture out of the air and storing the excess water in a holding tank. Many people keep dehumidifiers in their basement all year long to control the dampness that can often be felt in these underground areas. This is a great idea because controlling the humidity in the dampest part of your home will very likely help to regulate the rest of the house.  

One way to know if your house is holding a lot of moisture is to purchase a simple five-dollar humidity gauge from the local hardware store. Ideally, you want the humidity to be under 50%. If it’s higher, you might want to consider using a dehumidifier in the main part of your home, especially on hot summer days and in areas where you spend the most time. 

In addition to cooling the air and decreasing moisture, running a dehumidifier during the hottest parts of the hottest days can also prevent mold and mildew growth, eliminate musty odors in the home, and prevent old pipes from sweating. Plus, you can use the water collected in the tank to give your outdoor plants a good drink. 

Dehumidifiers generally run on about half the energy of an air conditioning unit, so as long as you don’t run them all day, using one shouldn’t affect your energy bill. Just be sure to keep windows and doors closed when you run your unit, and only switch the power on during the most humid time of the day, or when the air is above 50 percent humidity.

Be aware that dehumidifiers by nature are drying, so try not to run them while you’re occupying the room over a long period of time, like when you’re sleeping at night. Also, be careful about using dehumidifiers in conjunction with an attic fan. I see people do this all the time and they unintentionally throw the excess moisture from their home or basement up into their attic, where it has no place to escape.

If you’re thinking that a dehumidifier might be a good solution for you, they come in different sizes and can be used for residential or commercial purposes. Generally, a unit will come in 25, 30, and 40-pint models, and on average a 25-pint unit will be sufficient to operate in a 1,000 square foot area.

Finally, if you have a dehumidifier, please be sure to keep the filter clean. Dust, dirt, and debris can get caught in the filter, preventing air from flowing freely and potentially circulating mold spores throughout the home. A simple wipe down with a damp cloth and spray bottle will do the trick to keep you breathing freely and ensure a longer life for your appliance.

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.

A Vinyl Siding Conundrum

A reader recently wrote to me about a problem with her vinyl siding. The siding, which was only a few years old, had warped and started looking “wrinkled”, as she described it. At first, the reader thought it might be from direct sun exposure, but the wrinkling became visible all over the house, even in shady spots. What was she to do?

Warping is a fairly common problem with vinyl siding and it has nothing to do with the sun. The issue is actually called “oil canning” or “stress buckling” and it happens when the siding isn’t installed properly.

All homes are made of natural materials such as wood, which expand and contract with seasonal changes. People love vinyl siding because it’s very low maintenance and offers fantastic curb appeal, but a DIY or inexperienced install can actually make a house look much worse, even with very new siding. 

Every house needs to expand and contract. While it might seem logical to nail vinyl siding tightly to make sure it doesn’t come loose, doing so will actually cause the panel to buckle because it can’t expand and contract with the house. That’s why most vinyl siding panels come with longer nail slots instead of small holes. It gives everything room to move and shift. 

Another possible siding installation pitfall is leaving too much overlap between panels. While you might think this creates a stronger bond, it actually restricts movement, causing the siding to stretch and then buckle in the same way.

Back to my reader’s question. Is there ever a time when the sun might cause siding to warp? The answer is not really, although I have seen damage from sunlight reflecting off an adjacent window. The only other thing that could cause an issue is your gas grill, so keep it far away from the house. 

Once oil canning happens, the siding has to be replaced. Because the issue is installation, the product’s warranty is worthless and the manufacturer isn’t going to be responsible for the defect. While removing panels is pretty straightforward, it can be tough to get a color match if the siding is a bit older. 

These are all the reasons why it’s so important to work with a contractor who knows what he or she is doing. If you’re going to tackle this job on your own, make sure you do your research and know all the common mistakes that can be made. You don’t want all that hard work to result in a home aesthetic that’s anything less than perfect. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.