Cost Versus Value 2019: Home Remodeling Projects That Will Pay Upon Resale

One of my favorite things to review is the annual Remodeling Magazine Cost Versus Value Report which comes out at the end of January. This report compares home renovation projects by assessing their cost and their value in terms of resale if and when a house is put on the market. I always find this information to be extremely valuable and I love sharing it for two reasons: it gives my readers an idea about which remodeling projects will actually pay off in the long run and it also uncovers some less glamorous projects that can fetch bigger dollars on a home sale. One of the things I love about this report is that it gives remodelers and owners a glimpse at national trends, but it also breaks it right down on a local level. So let’s jump into the projects that are paying off right here in Hartford County.

Topping the list for 2019 is garage door replacement which, at an average cost of $3,717, will net you an average 99.9% back upon the resale of your home. Garage door replacement actually took the top spot locally, regionally, and nationally for the first time. It also just so happens to be one of the cheapest home remodeling jobs you can do.

Another big category was outdoor improvements with both deck additions and stone veneer upgrades recouping three-quarters of their costs. Here in Hartford County, a wood deck addition netted a homeowner 78% of its cost on an average $14,000 project and stone veneer came in at 73% cost recouped on a project under $10,000. My take on this is that people value both curb appeal and outdoor liveability, and smaller projects that make a house look like the best on the block can mean a major payoff in the long run.

Rounding out the rest on the top of the list in Hartford were minor kitchen remodels, midrange bathroom remodels, and siding and window replacements which all scored well above 50% in terms of their cost versus resale value. Again, investing in these types of projects which both beautify and modernize the home are smart spending and projects such as window upgrades are also both practical and cost-effective since they offer major bonus points in the energy efficiency department.

But what about the projects that don’t deliver as much value? At the bottom of the list were additions with a new luxury master suite netting only 45% of the costs outlaid and a bathroom addition only earning 47% on resale. My take on this? Bedrooms and bathrooms are highly personal and for these higher priced remodeling jobs, it’s tough to get someone to want to pay a premium for a costly job that might be unique to your family. If a bathroom or bedroom addition is in your future, try to tackle it with a flexible plan in mind and know that if a real estate transaction is in your future, a new family might not be as keen on a French bidet and walk-in dressing room as you are.

If you’re interested in the full report, you can access it here. Happy remodeling!

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Waterproof Your Chimney Now to Avoid Costly Repairs Later

You may have never thought about exterior chimney maintenance unless you’ve had a problem, but because chimneys come up above the roof line, they are more susceptible to harsh weather than any other part of your home. That’s why spending a little time and money to waterproof and protect the area can save you thousands of dollars and plenty of potential headaches down the road.

If you plan on waterproofing your chimney, the first thing you’ll have to do is measure the surface area. Take care to measure all sides and add the measurements together to find the total surface area. This will help you to determine how much material you will need.

Now, it’s time to clean. Your chimney will most certainly have mold, dirt, rust, and stains on it, and you’ll want to remove them before starting the waterproofing process. I like Chimney RX Safer Brick and Masonry Cleaner which you can use instead of muriatic acid for the same cleaning power without the harsh fumes or risk of burns. Applying the solution is easy: just use one part cleaner with four parts water and apply to the area with a pump sprayer. You can then either scrub the surface or use a power washer to remove the debris. Let everything dry for at least 24 hours before moving on to the next step.

Next, you can start to prepare the area for any potential repair work. You don't want to damage your roof and shingles when waterproofing your chimney, so use a canvas drop cloth to cover the area as plastic can get very slippery. Make sure to cover over any windows or skylights that are in reach as well. Once waterproofing overspray has been applied, it will be incredibly difficult to remove.

If you have minor cracks in the chimney, now is the time to fill them. Chimney RX makes a Masonry Crack and Joint Sealant that works really well on small cracks up to one-eighth of an inch. It simply paints on and then dries a milky white color. However, if you have larger cracks or if you need any part of the chimney rebuilt or tuckpointed, I highly suggest calling a professional to manage the repair.

Once minor work has been completed, you’re ready to apply the waterproofing agent. Again, ChimneyRX makes a great product for the job. No matter what you use, be careful. Most people don’t realize that there is a difference between water repellent and sealant. A sealant will form a hard surface, trapping water inside and making the area susceptible to leaks, whereas a repellent will still enable the porous bricks to breathe and move the way they are supposed to.

Applying the sealant is as easy as the cleaning step - all you’ll need is a pump sprayer with a fan nozzle. The product that you use will give instructions for the amount that you’ll need, so just go by your surface area and the directions provided. I always suggest starting from the base and working your way up, applying heavy coats using a side to side spraying motion. Unlike painting, it’s a good idea to apply a “flood coat” first and then top it up with a second coat within just a few minutes to even it out. For areas that feel oversaturated, have a soft bristle brush handy. Also, be sure you’re working in good weather - while waterproofing products do dry quickly, you’ll want to give them a good six hours in the sun to fully set before a bout of bad weather.

Finally, just like any job on a roof, please make sure you’re comfortable with heights and working from a ladder before you tackle this project. The last thing we want us a trip to the emergency room from a nasty fall. When in doubt, always hire a pro to tackle the job.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Ventilation is Key to a Safe, Healthy Home

I’m not shy about educating my customers about the importance of insulation in the home, especially during this time of year and with our recent, frigid temperatures. But even if you’re the one in every four people I talk to who has the right amount of insulation in their house, chances are that your ventilation is inadequate, which can be harming both your home and your personal health in more ways than you think.

In the winter, we crank up the thermostat, sending more heat and moisture into the living quarters of our homes than any other time of year. We all know that heat rises to the top, which means a lot of what we’re pumping into the house will quickly find its way through the ceiling and into the attic. Now, think about when you’re in a car and the windows fog up. What do you do? Usually, you’ll increase the airflow either by using the vents or just cracking a window. A house works much the same way, except that if you don’t have air flowing inside the attic, the heat and moisture just gets stuck there. If the attic is very warm, that moisture will develop into mold and mildew which can fester in your insulation and rot the wood. If the attic is cold enough, the moisture will freeze into little domes or even icicles until the temperature rises enough for the water to thaw and then be absorbed into all the places that it shouldn’t be going. Neither is a good scenario.

So what’s the best way to protect your home? Start by investing in a hygrometer which measures water vapor in the air. A comfortable humidity reading is 30%-60%, but 45%-55% is an ideal level to maintain. If you’re seeing higher than 60% humidity in any area of your home, it’s going to be susceptible to mold, mildew and bacteria growth.

Remember, attic ventilation allows your house to “breathe” so you want to balance your intake and exhaust to ensure that what is coming in is going out equally. The best ventilation system will include soffit vents which are installed underneath the overhang of the roof and take in the air and ridge vents which are installed at the top of the roof for the hot air to escape. For this method to work efficiently, all louvered vents must be sealed off and you have to ensure that your insulation isn’t blocking the airflow. Believe it or not, most roof manufacturers will void the warranty if a proper ventilation system is not installed. Luckily, new roofing technology enables contractors to add intake ventilation directly into the roof as opposed to using soffit vents, so if you’re in the market for a new roof, be sure to ask for that option.

It’s important to note that homes have different characteristics and what works well for one may not work well for another. With the right balance of air, homeowners can optimize their roof and maintain the overall health of their home and their families, but it’s always a good idea to get advice from a professional before taking on a big remodeling project. Stay warm friends.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.