Contact Us

Please feel free to get in touch to ask a question, schedule an appointment or give us your feedback. We look forward to hearing from you. 

17 Divinity St
Bristol, CT, 06010
United States

8605895155

Since 1975, O'Donnell Bros has been providing greater Bristol and Central Connecticut with residential and commercial remodeling solutions. We specialize in roofing, siding, windows, doors, gutters, downspouts and so much more. We look forward to helping you with all your remodeling needs. 

HomeImprovement-PT-050114_9032 (1).jpg

Articles

O'Donnell Bros President, Bob O'Donnell, is a regular contributor to The Bristol Press. Read his home improvement articles here.

 

Filtering by Category: Indoors

Now Is The Time - Get Your Hot Water Heater Ready for Winter

Chelsea O'Donnell

With the weather finally turning colder, now is a great time to give your water heater the tune-up it needs to make sure it’s in good working order for the winter. This kind of maintenance might seem like a big task, but if you haven’t had issues in the past, a simple check-up and clean out can really help your appliance run more efficiently while lengthening its life. Here are some tips. 

As a water heater operates, it collects sediment that can cause decay if left in the tank over time. Don’t let this happen to yours. Drain your water heater at least twice a year to get rid of any buildup, which will prevent corrosion and increase the machine’s energy efficiency. I like to do this in the fall and early spring, before and after the busy season.

First, turn off the unit and give it plenty of time to cool down. Then, using a garden hose and pump, drain the water into a bucket. If the bucket becomes filled with brown, sediment-tainted water, continue to refill and drain your heater until the water looks clean again. When you’re in the clear, you can disconnect your hose and turn the unit back on.

Keep your water heater at a steady 120 degrees and lower it down if you’re planning on leaving the house for three days or more. For every 10 degrees you decrease the temperature, you’ll save five percent in energy costs.

Insulate the tank and pipes with fiberglass. For the tank, fit a fiberglass blanket using foil tape, but be sure not to cover any valve or pipe openings. For the pipes, you can use fiberglass wrap or foam insulation. By adding a layer of insulation to your water heater, you’ll keep the warmth from escaping into the air and you’ll protect the machine from condensation in the warmer months. 

If you have a valve that’s leaking, make sure that the fittings are nice and tight. If anything is loose, you might have to replace the valves or fittings. You can find the parts you’ll need at a local hardware store – just don’t forget to shut off the water before fitting them!

Remember, working with electric or gas appliances can be dangerous. If you’re not familiar with how your unit operates or if you’re not comfortable with this kind of work, contact a plumber for a routine maintenance check.  

The average lifecycle of a water heater is about eight to twelve years and they can cost anywhere from $300 for an electric tank system to well over $1,000 for a tankless energy-efficient natural gas appliance. If you’re in the market for a new machine, do your research and make sure you maintain it regularly to ensure that it will go the distance. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Home Heating Stoves Make for a Cozy Winter

Chelsea O'Donnell

A beautiful fireplace adds both warmth and ambiance to any home, especially as the days get cooler and we begin spending more time indoors. Back in the day, the only option for a fireplace was one that burned wood, but now we have several options to keep us toasty - each with its benefits and drawbacks. If you’re thinking about upgrading your fireplace or trying something new, here are a few options to consider.

Wood

The classic choice. There are so many reasons to love wood from the traditional crackling sound that it makes to the hypnotic dancing of natural flames. I consider wood to be the fastest heater for the money in that you can quickly warm up a home without having to worry about your electricity bills. Another reason to love wood is if you have it. For rural or wooded area homes that need an annual clean-up, your fuel is free as long as you don’t mind the man hours. Think of it as a great workout.

Of course, with the pros come the cons. If you don’t have wood readily available, this kind of burner can get very expensive. If you do, you still have to cut and stack it yourself. It also needs to stay dry in order to light reliably. Wood is also pretty messy and while those piles can look great if they are well constructed, they also make perfect homes for rodents, termites, and mold. Finally, there is the efficiency factor. Wood burns hot and fast and regulating temperature is a lot tougher than other heating methods. Wood also emits particles into the air, which could affect people with breathing problems or asthma. And of course, there is also the need for a chimney which may make it prohibitive for some people.

Pellet

A pellet fireplace or stove uses small, compressed cylinders of sawdust to heat the home. What’s great about pellet stoves is that they are temperature regulated and don’t require a traditional chimney since many stoves use blowers to circulate heat. Another reason to love them is their efficiency. Because heat can be regulated and pellets are easier to maneuver, most homeowners can expect a cleaner, less labor-intensive burn.

Of course, pellet stoves have a few negative aspects to consider. While cleaner burning than wood, pellets are made from sawdust, which will bother people who are sensitive to dust, dander, and pollen. Similar to wood, there is also ash to consider, which needs to be dumped regularly to keep the fire burning efficiently. Pellet stoves are generally more intricate than a wood fireplace, which means there is more to clean and maintain. Finally, most stoves run on electricity which means you’re paying for both the pellets and the energy to burn them.

Natural Gas

Natural gas fireplaces have become one of the most popular options today, mainly because a unit can be fit into an existing fireplace or practically anywhere in the home. People love gas because it’s fast to heat, easy to control, and doesn’t require a chimney or electricity. Simply set the temperature you want and you’re ready to go. In comparison to wood or pellets, natural gas emits the least amount of particles, making it a popular choice for people who have breathing sensitivities. As long as your house already has natural gas, the set up is really easy and you don’t have to worry about buying anything to keep your home warm.

While natural gas does tick plenty of boxes, there are a few things to think about. Admittedly, natural gas flames are the most boring and predictable, making it the least ambiance-friendly option of the three. Of course, you’re also burning a fossil fuel, which is inexpensive right now but can always go up. Finally, if you don’t already have a gas line, you’ll need to get one installed, which might end up being more of a hassle than it’s worth. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.


Ceiling Cracks - A Telltale Sign of Hidden Danger in the Home

Chelsea O'Donnell

After 40 years in the remodeling business, I have seen my fair share of hazards and hair-raising discoveries inside of people’s homes. My reminiscing got me thinking that some of these stories might resonate with readers who delay having problems fixed for fear of what might be found. While major problems can sometimes be costly and disruptive, leaving an issue to fester can cause more damage down the line and could even end up affecting your health. 

I’ll never forget one summer when I got a call from a woman in Bristol who told me her roof was leaking. You wouldn’t think this seemed odd considering that I am a roof remodeler, but it hadn’t rained in a month. I mentioned this to the caller and she said, “Well I can’t be sure where the water is coming from, but my dining room ceiling just caved in.” 

I hung up the phone and immediately made my way over to her house. Sure enough, when I arrived, a pile of sheetrock and plaster was already being amassed on her front lawn. Upon entering the house, I found that she was not exaggerating. The ceiling had completely crumbled, leaving a soggy mess of remnants all over her dining room set. 

I first asked to see the bathroom on the second floor and I was told there wasn’t one. So I climbed into the attic and gasped when intense heat hit me in the face. I also noted two air conditioning units in the dining room - one in each window. I asked the homeowner about the air conditioners and how often they were used. It turned out that she had them on full power almost constantly to try and regulate the temperature because the top floor of the house was so hot. 

It was easy for me to see why the homeowner’s ceiling fell in. A lack of insulation and ventilation in the attic was causing the house to heat up to an uncomfortable level. The homeowner tried to combat this problem by cranking up her A/C. By doing so, she was creating major condensation in the walls and ceiling of the home. 

When hot and cold air collide they cause moisture which gets into plaster, sheetrock, and even wood. That moisture then generates mold spores that literally eat away at the ceiling and walls. Her 1950’s Cape Cod home was like most in our area, constructed with such poor insulation and ventilation that they are susceptible to rot. A surefire sign of trouble for this homeowner was cracking in the ceiling, which is the first sign of a problem. Instead of calling me then, her husband tried to mask the problem using those 12x12 ceiling panels that you often see in doctor’s offices. He meant well but the attempt at a cosmetic repair only added another layer of material for the moisture to seep into. 

The moral of the story is this. If your home has temperature issues, do not ignore the problem. By not addressing the humidity and moisture in your home, you could end up with major structural damage or worse. If that’s not enough to convince you, mold and mildew are leading causes of asthma and breathing problems, especially in young children and the elderly. Is it worth putting your family’s health at risk?

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.