Contact Us

Please feel free to get in touch to ask a question, schedule an appointment or give us your feedback. We look forward to hearing from you. 

17 Divinity St
Bristol, CT, 06010
United States

8605895155

Since 1975, O'Donnell Bros has been providing greater Bristol and Central Connecticut with residential and commercial remodeling solutions. We specialize in roofing, siding, windows, doors, gutters, downspouts and so much more. We look forward to helping you with all your remodeling needs. 

HomeImprovement-PT-050114_9032 (1).jpg

Articles

O'Donnell Bros President, Bob O'Donnell, is a regular contributor to The Bristol Press. Read his home improvement articles here.

 

Now Is The Time - Get Your Hot Water Heater Ready for Winter

Chelsea O'Donnell

With the weather finally turning colder, now is a great time to give your water heater the tune-up it needs to make sure it’s in good working order for the winter. This kind of maintenance might seem like a big task, but if you haven’t had issues in the past, a simple check-up and clean out can really help your appliance run more efficiently while lengthening its life. Here are some tips. 

As a water heater operates, it collects sediment that can cause decay if left in the tank over time. Don’t let this happen to yours. Drain your water heater at least twice a year to get rid of any buildup, which will prevent corrosion and increase the machine’s energy efficiency. I like to do this in the fall and early spring, before and after the busy season.

First, turn off the unit and give it plenty of time to cool down. Then, using a garden hose and pump, drain the water into a bucket. If the bucket becomes filled with brown, sediment-tainted water, continue to refill and drain your heater until the water looks clean again. When you’re in the clear, you can disconnect your hose and turn the unit back on.

Keep your water heater at a steady 120 degrees and lower it down if you’re planning on leaving the house for three days or more. For every 10 degrees you decrease the temperature, you’ll save five percent in energy costs.

Insulate the tank and pipes with fiberglass. For the tank, fit a fiberglass blanket using foil tape, but be sure not to cover any valve or pipe openings. For the pipes, you can use fiberglass wrap or foam insulation. By adding a layer of insulation to your water heater, you’ll keep the warmth from escaping into the air and you’ll protect the machine from condensation in the warmer months. 

If you have a valve that’s leaking, make sure that the fittings are nice and tight. If anything is loose, you might have to replace the valves or fittings. You can find the parts you’ll need at a local hardware store – just don’t forget to shut off the water before fitting them!

Remember, working with electric or gas appliances can be dangerous. If you’re not familiar with how your unit operates or if you’re not comfortable with this kind of work, contact a plumber for a routine maintenance check.  

The average lifecycle of a water heater is about eight to twelve years and they can cost anywhere from $300 for an electric tank system to well over $1,000 for a tankless energy-efficient natural gas appliance. If you’re in the market for a new machine, do your research and make sure you maintain it regularly to ensure that it will go the distance. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.

Home Heating Stoves Make for a Cozy Winter

Chelsea O'Donnell

A beautiful fireplace adds both warmth and ambiance to any home, especially as the days get cooler and we begin spending more time indoors. Back in the day, the only option for a fireplace was one that burned wood, but now we have several options to keep us toasty - each with its benefits and drawbacks. If you’re thinking about upgrading your fireplace or trying something new, here are a few options to consider.

Wood

The classic choice. There are so many reasons to love wood from the traditional crackling sound that it makes to the hypnotic dancing of natural flames. I consider wood to be the fastest heater for the money in that you can quickly warm up a home without having to worry about your electricity bills. Another reason to love wood is if you have it. For rural or wooded area homes that need an annual clean-up, your fuel is free as long as you don’t mind the man hours. Think of it as a great workout.

Of course, with the pros come the cons. If you don’t have wood readily available, this kind of burner can get very expensive. If you do, you still have to cut and stack it yourself. It also needs to stay dry in order to light reliably. Wood is also pretty messy and while those piles can look great if they are well constructed, they also make perfect homes for rodents, termites, and mold. Finally, there is the efficiency factor. Wood burns hot and fast and regulating temperature is a lot tougher than other heating methods. Wood also emits particles into the air, which could affect people with breathing problems or asthma. And of course, there is also the need for a chimney which may make it prohibitive for some people.

Pellet

A pellet fireplace or stove uses small, compressed cylinders of sawdust to heat the home. What’s great about pellet stoves is that they are temperature regulated and don’t require a traditional chimney since many stoves use blowers to circulate heat. Another reason to love them is their efficiency. Because heat can be regulated and pellets are easier to maneuver, most homeowners can expect a cleaner, less labor-intensive burn.

Of course, pellet stoves have a few negative aspects to consider. While cleaner burning than wood, pellets are made from sawdust, which will bother people who are sensitive to dust, dander, and pollen. Similar to wood, there is also ash to consider, which needs to be dumped regularly to keep the fire burning efficiently. Pellet stoves are generally more intricate than a wood fireplace, which means there is more to clean and maintain. Finally, most stoves run on electricity which means you’re paying for both the pellets and the energy to burn them.

Natural Gas

Natural gas fireplaces have become one of the most popular options today, mainly because a unit can be fit into an existing fireplace or practically anywhere in the home. People love gas because it’s fast to heat, easy to control, and doesn’t require a chimney or electricity. Simply set the temperature you want and you’re ready to go. In comparison to wood or pellets, natural gas emits the least amount of particles, making it a popular choice for people who have breathing sensitivities. As long as your house already has natural gas, the set up is really easy and you don’t have to worry about buying anything to keep your home warm.

While natural gas does tick plenty of boxes, there are a few things to think about. Admittedly, natural gas flames are the most boring and predictable, making it the least ambiance-friendly option of the three. Of course, you’re also burning a fossil fuel, which is inexpensive right now but can always go up. Finally, if you don’t already have a gas line, you’ll need to get one installed, which might end up being more of a hassle than it’s worth. 

Bob O’Donnell is the owner of O’Donnell Bros. Inc., a Bristol-based home improvement company established in 1975. Email your questions to info@odonnellbros.com with the subject line “Ask the Pro.” All questions may be considered for publication. To contact Bob for your remodeling needs, call O’Donnell Bros. Inc. at (860) 589-5155 or visit http://www.odonnellbros.com. Advice is for guidance only.


Finding the Right Contractor for the Job

Chelsea O'Donnell

With colder weather on the way, you might be in a race to batten down the hatches and get a few things fixed around the house. Finding the right expert might seem daunting and it’s true that sourcing someone with know-how can feel like a job in and of itself. But trust me, hiring the wrong professional can do a lot more harm than good. So where do you start? Here are my top tips for finding an honest, reputable contractor. 

Ask for referrals.

When it comes to hiring an expert for remodeling or home repair work, you should look at it the same way you would for a doctor or an accountant. Start by asking friends, family or co-workers for a referral, or you can also try your local building inspector or the owner of the lumberyard in your area. Additionally, every tradesperson has a network of other home professionals they deal with regularly; so if you have a plumber but need an electrician, don’t be afraid to reach out. 

Click the “like” button.

When meeting with professionals, your gut feeling is as important as anything else. Home improvement is a personal process so go at it in the same way you would a first date. Do you like the solutions and options the expert provides? Does he communicate with you in a way that’s clear and concise?  Do you feel comfortable that she will do the job the way you want it done? Don’t get caught up in special deals or flashy talk, trust your instincts and go with a professional that feels more like a partner than a salesperson.

Don’t ask for a rough estimate. 

If you have a big job that you need done, there is no use in asking for a “ballpark figure”. Chances are that the prices quoted in the estimate will change once the contractor has a chance to understand what is specifically required. Certain things such as the condition of the property, the materials used for the job and the personalization that you require will make up the price, so save yourself some time and confusion by making a list of what you really want before the contractors show up for the first appointment. Most professionals will give you an estimate for free so make the most of that opportunity by getting specific. Getting a good deal is important, but not if it means scrimping on quality workmanship. 

Do ask for a plan.

Understanding your costs is key, but it’s also a good idea to ask for a plan of action to ensure you are fully aware of both the process and the timeline for the job. A simple step-by-step explanation will give you the clarity you need to ensure that you and your contractor are on the same page and it will also help you plan around activities you might have going on, like family coming into town for the holidays. As a professional, I like to make sure the steps involved in a job are clearly articulated for two reasons; it gives my customers confidence in the project and it helps them understand all of the work being undertaken, especially the parts that might not be as obvious.  In my opinion, an educated customer is the best kind of customer.

Bob O'Donnell is the owner of O'Donnell Bros, Inc., a Bristol-based home improvement company established in 1975. Email your questions for Bob to info@odonnellbros.com with the subject line “Ask the Pro”. All questions may be considered for publication. To contact Bob for your remodeling needs, call O'Donnell Bros, Inc. at (860) 589-5155 or visit www.odonnellbros.com. Advice is for guidance only.